 |
Coastal Commercial Roofing is trained and certified to install a variety
of commercial roofing systems:
ROOFING SYSTEMS
EPDM ROOF SYSTEMS
Durability, design versatility and installation ease are among the
many reasons EPDM is the most popular material for both new and re-roof
low-slope roofing applications. EPDM membranes may be installed in
a full range of system applications. The earliest predominant design
was the ballasted roof, in which the membrane is loosely laid over
the substrate (usually loose laid insulation). The membrane is then
covered with a layer of ballast, stone or pavers, which serve as the
anchoring method that keeps the membrane in place when exposed to
wind uplift forces. EPDM membranes may also be fully adhered to rigid
insulation board or an appropriate structural deck. This system eliminates
the weight of the ballast and leaves the membrane exposed, thus offering
many opportunities for aesthetic appeal through the use of specially
colored membranes and coatings or just the smooth, clean appearance
of an adhered black membrane. Mechanically attached EPDM roof systems
are also available.
TPO ROOF SYSTEMS
Thermoplastic single-ply roofing membranes are among the fastest growing
commercial roofing products and have gained broad industry acceptance
for their many performance and installation advantages. TPO is a flexible,
hot-air welded thermoplastic polyolefin (TPO) roofing membrane available
in both 8’ and 10’ widths. Featuring a white, tan or gray
reflective surface, TPO can help reduce a building’s cooling
requirements.
PVC SYSTEMS
Outstanding weathering characteristics, energy efficiency, installation
ease and durability are among the many advantages of polyvinyl chloride
(PVC) roofing systems. This hot-air welded, polyester scrim-reinforced
membrane has a white, reflective surface, and is available in 45-mil
and 60-mil thicknesses.
ASPHALT SYSTEMS
Asphalt systems include the different types of roofs such as pre-manufactured
Modified Bitumen membrane system, a standard built-up system, or a
hybrid BUR/Modified Bitumen system.A SBS Modified Bitumen Roofing
System combines exceptional elongation and fatigue resistance properties
with the strength of a glass-reinforced polyester mat. Available in
white, black and other granule surface colors, SBS membranes may be
installed by heat welding, hot asphalt, cold-applied adhesive, mechanical
attachment or as part of a self-adhered system.
STANDING SEAM METAL ROOF SYSTEMS
A Standing Seam Metal Roofing System attributes are impressive. Durable
and long lasting, a metal roof requires little maintenance, can be
retrofitted over many existing roofing materials, is available in
a wide range of colors and styles, and is fire resistant. This type
of system is very popular on shopping centers and other commercial
properties.
Manufacturers
Coastal Commercial Roofing is certified by these leading manufacturers
as well as many others:
One Source for Quality Roofing Systems
|
|
CCR completed two
publicly bid Roofing Projects for Floyd Abrams Company during the
past year. Both asphalt BUR installations were completed in a timely
manner with excellent communication and coordination with the Owner.
Ed Banks is an experienced, knowledgeable and quality conscious Superintendent
who demands expert workmanship from installation crews. David Griffin
and his office staff are courteous and do not delay contractual requirements.
I hope CCR has the successful Bid on our next Project.
Floyd Abrams, R.R.C.
President |
|
